ZIK011-I - 1-Inlet Installation Kit with an Electrified Valve - Almond

• 1 x Inlet Valve - White
  The Wall Inlet Valve is equipped with the low voltage connection for remote turn on/off as well as the elctrical box for ~120v hook-up.
• 1 x Mounting Plate / Electical Box (for the valves)
• 3 x 90 degree Sweep Elbow
• 2 x 45 degree Elbow
• 2 x Stop Coupling (to join the 2" pipe together) 
• 1 x 90 Wye "Tee"
• 1 x 90 Sharp Elbow (you must use these at the back of each Inlet Valve) 
• 2 x Pipe strap
• 1 x Low voltage wire ( 25 feet )
• 1 x Solvent Cement ( 60 ml )
  

Low Voltage wire Specifications:  Two conductor 22 gauge typical speaker wire
~120 v wire not supplied:  Consult your local building code for american wire gauge requirements