CALL: 1-877-593-2532 | 10AM - 6PM EST MON - SAT
Cart subtotal {{total}} USD Recently added item(s):
Shopping cart is empty
{{item.code}} - {{item.name}}
{{item.qty}} x {{item.pricec}} {{item.curr_code}}
Product Finder Enter phrase: or Select Filtration:
Select Cleaning Area:
Select Suction Power:
Select Air-Power:
Select Motor:
Select Power Unit Voltage:
Select Powerhead Operating Voltage:
Select Hose Length:
Select Hose Operating Voltage:
Select Hose Configuration:
Vacuum comparison
No items selected
OTHER BRANDS

Allegro RV Central Vacuum Mounting Instructions

Power Unit Mounting 5 Easy Steps

  1. Determine the location of wall mount bracket. The height of Power Unit is 20" in total. You should allow at least 4" clearance from the top. Therefore top screw hole on wall mount bracket should be 12" from the floor. The distance between top and bottom screw holes is 1.5", or the bottom screw hole is 10.5" from the floor.

  2. Screw top & bottom screws firmly at the height described above.

  3. Hang Power Unit from the wall mount bracket. At this point your Power Unit is mounted securely.

  4. Connect optional low-voltage wires, vacuum line and/or exhaust line* as shown below.

    Click to view full size

  5. Plug Power Unit cord into a 15 Amp electrical outlet and test the Power Unit with on/off switch.
    Do not pick up anything that is burning or smoking, such as cigarettes, matches or hot ashes.

    *Note: Do not exceed 12 ft (4m) of total exhaust line.

Get In Touch With Us Today!

Please enter the letters from the image below
Enter the code