CALL: 1-877-593-2532 | 10AM - 6PM EST MON - SAT
Cart subtotal {{total}} USD Recently added item(s):
Shopping cart is empty
{{item.code}} - {{}}
{{item.qty}} x {{item.pricec}} {{item.curr_code}}
Product Finder Enter phrase: or Select Filtration:
Select Cleaning Area:
Select Suction Power:
Select Air-Power:
Select Motor:
Select Power Unit Voltage:
Select Powerhead Operating Voltage:
Select Hose Length:
Select Hose Operating Voltage:
Select Hose Configuration:
Vacuum comparison
No items selected

Central Vacuum Standard Inlet Valve / Installation Instructions


How to Install Central Vacuum Wall Inlet Valves 

ln order to operate the central vacuum power unit remotely from inside your home you would need to complete the low-voltage 24v dc wiring. The Wall lnlet Valves (Faceplates) ZIC010 are connected together in parallel so each Wall lnlet Valve (Faceplate) could operate the system independenily.  The low-voltage wiring is terminated at the 24 v dc Power Unit low-voltage connections.


For the low voltage connections please follow the diagram below:


Fig.1 Allegro Standard Wall Inlet Valve Installation Instruction


1) Do not completely remove low-voltage connection screws to avoid losing the internal spring and the contact mechanism.

2) Turn the low-voltage wire around connection screws in clockwise direction.

3) Make sure that there are no exposed copper to touch each other and make connection per Fig.1. This will keep the Power Unit running constantly.

4) If you home is roughed in for central vacuum piping and the low-voltage wire is four conductor instead of two. You can pair any two together as long as you stay with the same colors throughout the house. Or just use any same two colors throughout.

Central Vacuum Low-Voltage Wire Specifications:

22 gauge Two Conductor

Solid Copper or Strand











Get In Touch With Us Today!

Please enter the letters from the image below
Enter the code